河间做网站 申梦网络,免费门户网站开发,保险平台,公司怎么建立网站NAT64采用tayga实现#xff0c;DNS64采用bind9.8实现。1 平台搭建平台为ubuntu12.04 Desktop版本。正常安装即可。2 NAT64(tayga)2.1 安装在终端模式下输入sudo apt-get install tayga2.2 配置2.2.1 相关设置sudo gedit /etc/tayga.conf按照说明配置#xff0c;目前实现方案不…NAT64采用tayga实现DNS64采用bind9.8实现。1 平台搭建平台为ubuntu12.04 Desktop版本。正常安装即可。2 NAT64(tayga)2.1 安装在终端模式下输入sudo apt-get install tayga2.2 配置2.2.1 相关设置sudo gedit /etc/tayga.conf按照说明配置目前实现方案不需要修改。2.2.2 创建、启动设备tayga –mktunip link set nat64 up2.2.3 地址、路由配置ip addr add 192.168.0.1 dev nat64 (修改为本机IPv4地址)ip addr add 2001:db8:1::1 dev nat64 (修改为本机IPv6地址)ip route add 192.168.255.0/24 dev nat64(不需要修改)ip route add 2001:db8:1:ffff::/96 dev nat64(不需要修改)2.2.4 启动IPv4、IPv6转发sysctl -w net.ipv4.conf.all.forwarding1sysctl -w net.ipv6.conf.all.forwarding12.2.5 启动taygatayga可使用tayga –d进入debug模式。ping6 2001:db8:1:ffff::192.168.0.1(192.168.0.1修改为本机IPv4地址)2.2.6 NAT64设置iptables -t nat -A POSTROUTING -s 192.168.255.0/24 -j SNAT --to-source 192.168.0.1 (修改为本机IPv4地址)iptables -A FORWARD -s 192.168.255.0/24 -i nat64 -j ACCEPT3 DNS64 bind93.1 安装sudo apt-get install bind93.2 配置sudo gedit /etc/bind/named.conf.options修改为如下options {directory /var/cache/bind;// If there is a firewall between you and nameservers you want// to talk to, you may need to fix the firewall to allow multiple// ports to talk. See http://www.kb.cert.org/vuls/id/800113// If your ISP provided one or more IP addresses for stable// nameservers, you probably want to use them as forwarders.// Uncomment the following block, and insert the addresses replacing// the all-0s placeholder.listen-on-v6 { any; };allow-query { any; };dns64 2001:db8:1:ffff::/96 {clients { any; };};forwarders {8.8.8.8; //DNS地址};//// If BIND logs error messages about the root key being expired,// you will need to update your keys. See https://www.isc.org/bind-keys//dnssec-validation auto;auth-nxdomain no; # conform to RFC1035listen-on-v6 { any; };};修改完成后输入 named.conf查看修改是否成功。3.3 启动bind9Bind9默认安装后开机启动。设置完成后输入/etc/init.d/bind restart4 使用4.1 Windows用管理员权限进入cmd输入netshinterface ipv6add route 2001:db8:1:ffff::/96(修改为机器的ipv6地址) 本地连接 2001:db8:1::1(修改为服务器的ipv6地址)然后设置DNS服务器为NAT64地址即可4.2 Linux添加路由ip route add 2001:db8:1:ffff::/96 (修改为机器的ipv6地址) via 2001:db8:1::1(为服务器的ipv6地址)然后设置DNS服务器为NAT64地址即可注本文中服务器地址为192.168.130.422400:dd01:1001:130:250:c2ff:fe23:f051/64
