化工厂建设网站,家具设计师常去的网站,Wordpress更改登录入口,app网站开发学习一、实验拓扑 二、实验要求
1、内网IP地址172.16.0.0/16合理分配#xff1b;
2、SW1/2之间互为备份#xff1b;
3、VRRP/STP/VLAN/TRUNK均使用#xff1b;
4、所有PC通过DHCP获取IP地址#xff1b;
三、实验思路
1、配置ISP的IP地址#xff1b;
2、配置R1的IP地址
2、SW1/2之间互为备份
3、VRRP/STP/VLAN/TRUNK均使用
4、所有PC通过DHCP获取IP地址
三、实验思路
1、配置ISP的IP地址
2、配置R1的IP地址静态路由nat配置
3、SW1/2/3/4的接口类型配置
4、SW1/2的生成树的配置生成树优化IP地址配置
5、SW3/4的边缘接口配置
6、开启SW1/2的DHCP服务配置DHCP地址池
7、配置SW1/2的缺省路由实现全网可达
8、测试
四、实验配置
ISP配置
//基础配置
Huaweisys
Enter system view, return user view with CtrlZ.
[Huawei]sys ISP
[ISP]int l0
[ISP-LoopBack0]ip add 1.1.1.1 24
[ISP-LoopBack0]int g0/0/0
[ISP-GigabitEthernet0/0/0]ip add 12.1.1.2 24R1配置
sys
sys R1
int g0/0/2
ip add 12.1.1.1 24
int g0/0/0
ip add 172.16.0.1 30
int g0/0/1
ip add 172.16.0.5 30
qu
rip 1
ver 2
network 172.16.0.0
qu
ip route-static 0.0.0.0 0 12.1.1.2
acl 2000
rule permit source 172.16.0.0 0.0.0.255
int g0/0/2
nat outbound 2000SW1配置
sys
sys SW1
vlan batch 2 100
int Eth-Trunk 0
q
int e0/0/1
eth-trunk 0
int e0/0/2
eth-trunk 0
port-group group-member Ethernet 0/0/3 Ethernet 0/0/4 Eth-Trunk 0
port link-type trunk
port trunk allow-pass vlan all
qu
stp mode mstp
stp enable
stp region-configuration
region-name a
instance 1 vlan 1
instance 2 vlan 2
active region-configuration
qu
stp instance 1 root primary
stp instance 2 root secondary
interface vlan 1 //配置svi时顺便把虚拟IP地址配了使客户端在更换网关设备后不变更网关以然可以上网
ip add 172.16.0.129 26
vrrp vrid 1 virtual-ip 172.16.0.190
vrrp vrid 1 priority 120
vrrp vrid 1 track interface GigabitEthernet 0/0/1 reduced 30
interface vlan 2
ip add 172.16.0.193 26
vrrp vrid 1 virtual-ip 172.16.0.254
qu
int vlan 100
ip address 172.16.0.2 255.255.255.252
int g0/0/1
port link-type access
port default vlan 100
qu
rip 1
version 2
network 172.16.0.0
qu
ip route-static 0.0.0.0 0 172.16.0.1
dhcp enable
ip pool v1
network 172.16.0.128 mask 26
gateway-list 172.16.0.190
dns-list 8.8.8.8
qu
ip pool v2
network 172.16.0.192 mask 26
gateway-list 172.16.0.254
dns-list 8.8.8.8
qu
int vlan 1
dhcp select global
int vlan 2
dhcp select globalSW2配置
sys
sys SW2
vlan batch 2 100
int e0/0/1
eth-trunk 0
int e0/0/2
eth-trunk 0
port-group group-member Ethernet 0/0/3 Ethernet 0/0/4 Eth-Trunk 0
port link-type trunk
port trunk allow-pass vlan all
qu
stp mode mstp
stp enable
stp region-configuration
region-name a
instance 1 vlan 1
instance 2 vlan 2
active region-configuration
qu
stp instance 1 root secondary
stp instance 2 root primary
interface vlan 1 //配置svi时顺便把虚拟IP地址配了使客户端在更换网关设备后不变更网关以然可以上网
ip add 172.16.0.130 26
vrrp vrid 1 virtual-ip 172.16.0.190
interface vlan 2
ip add 172.16.0.194 26
vrrp vrid 1 virtual-ip 172.16.0.254
vrrp vrid 1 priority 120
vrrp vrid 1 track interface GigabitEthernet 0/0/1 reduced 30
qu
int vlan 100
ip address 172.16.0.6 255.255.255.252
interface GigabitEthernet0/0/1
port link-type access
port default vlan 100
qu
rip 1
version 2
network 172.16.0.0
qu
ip route-static 0.0.0.0 0 172.16.0.5
dhcp enable
ip pool v1
network 172.16.0.128 mask 26
gateway-list 172.16.0.190
dns-list 8.8.8.8
qu
ip pool v2
network 172.16.0.192 mask 26
gateway-list 172.16.0.254
dns-list 8.8.8.8
qu
int vlan 1
dhcp select global
int vlan 2
dhcp select globalSW3配置
sys
sys SW3
vlan 2
qu
interface e0/0/2
port link-type access
port default vlan 2
port-group group-member Ethernet 0/0/3 Ethernet 0/0/4
port link-type trunk
port trunk allow-pass vlan all
qu
port-group group-member Ethernet 0/0/1 to Ethernet 0/0/2
stp edged-port enable
quSW4配置
sys
sys SW4
vlan 2
qu
interface e0/0/2
port link-type access
port default vlan 2
port-group group-member Ethernet 0/0/3 Ethernet 0/0/4
port link-type trunk
port trunk allow-pass vlan all
qu
port-group group-member Ethernet 0/0/1 to Ethernet 0/0/2
stp edged-port enable
qu五、测试 PC1pingISP的环回地址 PC2pingISP的环回地址 PC1pingPC4 切换VLAN1的根网桥
