石排网站建设,怎么做网页别人可以看到图片,asp网站添加背景音乐,网页和网站有什么关系我们之前所写的方法#xff0c;发现只能在QT编译模式下解决这个问题#xff0c;而在指令行模式下不能编译通过#xff0c;因为QT模式基于cmake#xff0c;而make all基于Makefile
因而我们参照DeepLab的Makefile文件#xff1a;
发现只要将其中关于matio的内容加到我们的…我们之前所写的方法发现只能在QT编译模式下解决这个问题而在指令行模式下不能编译通过因为QT模式基于cmake而make all基于Makefile
因而我们参照DeepLab的Makefile文件
发现只要将其中关于matio的内容加到我们的对应文件中就能解决问题。
https://bitbucket.org/aquariusjay/deeplab-public-ver2/src/071ef5a59aad8d9e6e1f5b8dff3d7a5c984a3d3a/Makefile?atmasterfileviewerfile-view-default PROJECT : caffeCONFIG_FILE : Makefile.config
# Explicitly check for the config file, otherwise make -k will proceed anyway.
ifeq ($(wildcard $(CONFIG_FILE)),)
$(error $(CONFIG_FILE) not found. See $(CONFIG_FILE).example.)
endif
include $(CONFIG_FILE)BUILD_DIR_LINK : $(BUILD_DIR)
ifeq ($(RELEASE_BUILD_DIR),)RELEASE_BUILD_DIR : .$(BUILD_DIR)_release
endif
ifeq ($(DEBUG_BUILD_DIR),)DEBUG_BUILD_DIR : .$(BUILD_DIR)_debug
endifDEBUG ? 0
ifeq ($(DEBUG), 1)BUILD_DIR : $(DEBUG_BUILD_DIR)OTHER_BUILD_DIR : $(RELEASE_BUILD_DIR)
elseBUILD_DIR : $(RELEASE_BUILD_DIR)OTHER_BUILD_DIR : $(DEBUG_BUILD_DIR)
endif# All of the directories containing code.
SRC_DIRS : $(shell find * -type d -exec bash -c find {} -maxdepth 1 \\( -name *.cpp -o -name *.proto \) | grep -q . \; -print)# The target shared library name
LIBRARY_NAME : $(PROJECT)
LIB_BUILD_DIR : $(BUILD_DIR)/lib
STATIC_NAME : $(LIB_BUILD_DIR)/lib$(LIBRARY_NAME).a
DYNAMIC_VERSION_MAJOR : 1
DYNAMIC_VERSION_MINOR : 0
DYNAMIC_VERSION_REVISION : 0-rc3
DYNAMIC_NAME_SHORT : lib$(LIBRARY_NAME).so
#DYNAMIC_SONAME_SHORT : $(DYNAMIC_NAME_SHORT).$(DYNAMIC_VERSION_MAJOR)
DYNAMIC_VERSIONED_NAME_SHORT : $(DYNAMIC_NAME_SHORT).$(DYNAMIC_VERSION_MAJOR).$(DYNAMIC_VERSION_MINOR).$(DYNAMIC_VERSION_REVISION)
DYNAMIC_NAME : $(LIB_BUILD_DIR)/$(DYNAMIC_VERSIONED_NAME_SHORT)
COMMON_FLAGS -DCAFFE_VERSION$(DYNAMIC_VERSION_MAJOR).$(DYNAMIC_VERSION_MINOR).$(DYNAMIC_VERSION_REVISION)##############################
# Get all source files
##############################
# CXX_SRCS are the source files excluding the test ones.
CXX_SRCS : $(shell find src/$(PROJECT) ! -name test_*.cpp -name *.cpp)
# CU_SRCS are the cuda source files
CU_SRCS : $(shell find src/$(PROJECT) ! -name test_*.cu -name *.cu)
# TEST_SRCS are the test source files
TEST_MAIN_SRC : src/$(PROJECT)/test/test_caffe_main.cpp
TEST_SRCS : $(shell find src/$(PROJECT) -name test_*.cpp)
TEST_SRCS : $(filter-out $(TEST_MAIN_SRC), $(TEST_SRCS))
TEST_CU_SRCS : $(shell find src/$(PROJECT) -name test_*.cu)
GTEST_SRC : src/gtest/gtest-all.cpp
# TOOL_SRCS are the source files for the tool binaries
TOOL_SRCS : $(shell find tools -name *.cpp)
# EXAMPLE_SRCS are the source files for the example binaries
EXAMPLE_SRCS : $(shell find examples -name *.cpp)
# BUILD_INCLUDE_DIR contains any generated header files we want to include.
BUILD_INCLUDE_DIR : $(BUILD_DIR)/src
# PROTO_SRCS are the protocol buffer definitions
PROTO_SRC_DIR : src/$(PROJECT)/proto
PROTO_SRCS : $(wildcard $(PROTO_SRC_DIR)/*.proto)
# PROTO_BUILD_DIR will contain the .cc and obj files generated from
# PROTO_SRCS; PROTO_BUILD_INCLUDE_DIR will contain the .h header files
PROTO_BUILD_DIR : $(BUILD_DIR)/$(PROTO_SRC_DIR)
PROTO_BUILD_INCLUDE_DIR : $(BUILD_INCLUDE_DIR)/$(PROJECT)/proto
# NONGEN_CXX_SRCS includes all source/header files except those generated
# automatically (e.g., by proto).
NONGEN_CXX_SRCS : $(shell find \src/$(PROJECT) \include/$(PROJECT) \python/$(PROJECT) \matlab/$(PROJECT)/private \examples \tools \-name *.cpp -or -name *.hpp -or -name *.cu -or -name *.cuh)
LINT_SCRIPT : scripts/cpp_lint.py
LINT_OUTPUT_DIR : $(BUILD_DIR)/.lint
LINT_EXT : lint.txt
LINT_OUTPUTS : $(addsuffix .$(LINT_EXT), $(addprefix $(LINT_OUTPUT_DIR)/, $(NONGEN_CXX_SRCS)))
EMPTY_LINT_REPORT : $(BUILD_DIR)/.$(LINT_EXT)
NONEMPTY_LINT_REPORT : $(BUILD_DIR)/$(LINT_EXT)
# PY$(PROJECT)_SRC is the python wrapper for $(PROJECT)
PY$(PROJECT)_SRC : python/$(PROJECT)/_$(PROJECT).cpp
PY$(PROJECT)_SO : python/$(PROJECT)/_$(PROJECT).so
PY$(PROJECT)_HXX : include/$(PROJECT)/layers/python_layer.hpp
# MAT$(PROJECT)_SRC is the mex entrance point of matlab package for $(PROJECT)
MAT$(PROJECT)_SRC : matlab/$(PROJECT)/private/$(PROJECT)_.cpp
ifneq ($(MATLAB_DIR),)MAT_SO_EXT : $(shell $(MATLAB_DIR)/bin/mexext)
endif
MAT$(PROJECT)_SO : matlab/$(PROJECT)/private/$(PROJECT)_.$(MAT_SO_EXT)##############################
# Derive generated files
##############################
# The generated files for protocol buffers
PROTO_GEN_HEADER_SRCS : $(addprefix $(PROTO_BUILD_DIR)/, \$(notdir ${PROTO_SRCS:.proto.pb.h}))
PROTO_GEN_HEADER : $(addprefix $(PROTO_BUILD_INCLUDE_DIR)/, \$(notdir ${PROTO_SRCS:.proto.pb.h}))
PROTO_GEN_CC : $(addprefix $(BUILD_DIR)/, ${PROTO_SRCS:.proto.pb.cc})
PY_PROTO_BUILD_DIR : python/$(PROJECT)/proto
PY_PROTO_INIT : python/$(PROJECT)/proto/__init__.py
PROTO_GEN_PY : $(foreach file,${PROTO_SRCS:.proto_pb2.py}, \$(PY_PROTO_BUILD_DIR)/$(notdir $(file)))
# The objects corresponding to the source files
# These objects will be linked into the final shared library, so we
# exclude the tool, example, and test objects.
CXX_OBJS : $(addprefix $(BUILD_DIR)/, ${CXX_SRCS:.cpp.o})
CU_OBJS : $(addprefix $(BUILD_DIR)/cuda/, ${CU_SRCS:.cu.o})
PROTO_OBJS : ${PROTO_GEN_CC:.cc.o}
OBJS : $(PROTO_OBJS) $(CXX_OBJS) $(CU_OBJS)
# tool, example, and test objects
TOOL_OBJS : $(addprefix $(BUILD_DIR)/, ${TOOL_SRCS:.cpp.o})
TOOL_BUILD_DIR : $(BUILD_DIR)/tools
TEST_CXX_BUILD_DIR : $(BUILD_DIR)/src/$(PROJECT)/test
TEST_CU_BUILD_DIR : $(BUILD_DIR)/cuda/src/$(PROJECT)/test
TEST_CXX_OBJS : $(addprefix $(BUILD_DIR)/, ${TEST_SRCS:.cpp.o})
TEST_CU_OBJS : $(addprefix $(BUILD_DIR)/cuda/, ${TEST_CU_SRCS:.cu.o})
TEST_OBJS : $(TEST_CXX_OBJS) $(TEST_CU_OBJS)
GTEST_OBJ : $(addprefix $(BUILD_DIR)/, ${GTEST_SRC:.cpp.o})
EXAMPLE_OBJS : $(addprefix $(BUILD_DIR)/, ${EXAMPLE_SRCS:.cpp.o})
# Output files for automatic dependency generation
DEPS : ${CXX_OBJS:.o.d} ${CU_OBJS:.o.d} ${TEST_CXX_OBJS:.o.d} \${TEST_CU_OBJS:.o.d} $(BUILD_DIR)/${MAT$(PROJECT)_SO:.$(MAT_SO_EXT).d}
# tool, example, and test bins
TOOL_BINS : ${TOOL_OBJS:.o.bin}
EXAMPLE_BINS : ${EXAMPLE_OBJS:.o.bin}
# symlinks to tool bins without the .bin extension
TOOL_BIN_LINKS : ${TOOL_BINS:.bin}
# Put the test binaries in build/test for convenience.
TEST_BIN_DIR : $(BUILD_DIR)/test
TEST_CU_BINS : $(addsuffix .testbin,$(addprefix $(TEST_BIN_DIR)/, \$(foreach obj,$(TEST_CU_OBJS),$(basename $(notdir $(obj))))))
TEST_CXX_BINS : $(addsuffix .testbin,$(addprefix $(TEST_BIN_DIR)/, \$(foreach obj,$(TEST_CXX_OBJS),$(basename $(notdir $(obj))))))
TEST_BINS : $(TEST_CXX_BINS) $(TEST_CU_BINS)
# TEST_ALL_BIN is the test binary that links caffe dynamically.
TEST_ALL_BIN : $(TEST_BIN_DIR)/test_all.testbin##############################
# Derive compiler warning dump locations
##############################
WARNS_EXT : warnings.txt
CXX_WARNS : $(addprefix $(BUILD_DIR)/, ${CXX_SRCS:.cpp.o.$(WARNS_EXT)})
CU_WARNS : $(addprefix $(BUILD_DIR)/cuda/, ${CU_SRCS:.cu.o.$(WARNS_EXT)})
TOOL_WARNS : $(addprefix $(BUILD_DIR)/, ${TOOL_SRCS:.cpp.o.$(WARNS_EXT)})
EXAMPLE_WARNS : $(addprefix $(BUILD_DIR)/, ${EXAMPLE_SRCS:.cpp.o.$(WARNS_EXT)})
TEST_WARNS : $(addprefix $(BUILD_DIR)/, ${TEST_SRCS:.cpp.o.$(WARNS_EXT)})
TEST_CU_WARNS : $(addprefix $(BUILD_DIR)/cuda/, ${TEST_CU_SRCS:.cu.o.$(WARNS_EXT)})
ALL_CXX_WARNS : $(CXX_WARNS) $(TOOL_WARNS) $(EXAMPLE_WARNS) $(TEST_WARNS)
ALL_CU_WARNS : $(CU_WARNS) $(TEST_CU_WARNS)
ALL_WARNS : $(ALL_CXX_WARNS) $(ALL_CU_WARNS)EMPTY_WARN_REPORT : $(BUILD_DIR)/.$(WARNS_EXT)
NONEMPTY_WARN_REPORT : $(BUILD_DIR)/$(WARNS_EXT)##############################
# Derive include and lib directories
##############################
CUDA_INCLUDE_DIR : $(CUDA_DIR)/includeCUDA_LIB_DIR :
# add cuda/lib64 only if it exists
ifneq ($(wildcard $(CUDA_DIR)/lib64),)CUDA_LIB_DIR $(CUDA_DIR)/lib64
endif
CUDA_LIB_DIR $(CUDA_DIR)/libINCLUDE_DIRS $(BUILD_INCLUDE_DIR) ./src ./include
ifneq ($(CPU_ONLY), 1)INCLUDE_DIRS $(CUDA_INCLUDE_DIR)LIBRARY_DIRS $(CUDA_LIB_DIR)LIBRARIES : cudart cublas curand
endifLIBRARIES glog gflags protobuf boost_system boost_filesystem m hdf5_hl hdf5# handle IO dependencies
USE_LEVELDB ? 1
USE_LMDB ? 1
USE_OPENCV ? 1
USE_MATIO ? 1ifeq ($(USE_LEVELDB), 1)LIBRARIES leveldb snappy
endif
ifeq ($(USE_LMDB), 1)LIBRARIES lmdb
endif
ifeq ($(USE_OPENCV), 1)LIBRARIES opencv_core opencv_highgui opencv_imgproc ifeq ($(OPENCV_VERSION), 3)LIBRARIES opencv_imgcodecsendif
endif
ifeq ($(USE_MATIO), 1)LIBRARIES matio
endif
PYTHON_LIBRARIES ? boost_python python2.7
WARNINGS : -Wall -Wno-sign-compare##############################
# Set build directories
##############################DISTRIBUTE_DIR ? distribute
DISTRIBUTE_SUBDIRS : $(DISTRIBUTE_DIR)/bin $(DISTRIBUTE_DIR)/lib
DIST_ALIASES : dist
ifneq ($(strip $(DISTRIBUTE_DIR)),distribute)DIST_ALIASES distribute
endifALL_BUILD_DIRS : $(sort $(BUILD_DIR) $(addprefix $(BUILD_DIR)/, $(SRC_DIRS)) \$(addprefix $(BUILD_DIR)/cuda/, $(SRC_DIRS)) \$(LIB_BUILD_DIR) $(TEST_BIN_DIR) $(PY_PROTO_BUILD_DIR) $(LINT_OUTPUT_DIR) \$(DISTRIBUTE_SUBDIRS) $(PROTO_BUILD_INCLUDE_DIR))##############################
# Set directory for Doxygen-generated documentation
##############################
DOXYGEN_CONFIG_FILE ? ./.Doxyfile
# should be the same as OUTPUT_DIRECTORY in the .Doxyfile
DOXYGEN_OUTPUT_DIR ? ./doxygen
DOXYGEN_COMMAND ? doxygen
# All the files that might have Doxygen documentation.
DOXYGEN_SOURCES : $(shell find \src/$(PROJECT) \include/$(PROJECT) \python/ \matlab/ \examples \tools \-name *.cpp -or -name *.hpp -or -name *.cu -or -name *.cuh -or \-name *.py -or -name *.m)
DOXYGEN_SOURCES $(DOXYGEN_CONFIG_FILE)##############################
# Configure build
############################### Determine platform
UNAME : $(shell uname -s)
ifeq ($(UNAME), Linux)LINUX : 1
else ifeq ($(UNAME), Darwin)OSX : 1OSX_MAJOR_VERSION : $(shell sw_vers -productVersion | cut -f 1 -d .)OSX_MINOR_VERSION : $(shell sw_vers -productVersion | cut -f 2 -d .)
endif# Linux
ifeq ($(LINUX), 1)CXX ? /usr/bin/gGCCVERSION : $(shell $(CXX) -dumpversion | cut -f1,2 -d.)# older versions of gcc are too dumb to build boost with -Wuninitalizedifeq ($(shell echo | awk {exit $(GCCVERSION) 4.6;}), 1)WARNINGS -Wno-uninitializedendif# boost::thread is reasonably called boost_thread (compare OS X)# We will also explicitly add stdc to the link target.LIBRARIES boost_thread stdcVERSIONFLAGS -Wl,-soname,$(DYNAMIC_VERSIONED_NAME_SHORT) -Wl,-rpath,$(ORIGIN)/../lib
endif# OS X:
# clang instead of g
# libstdc for NVCC compatibility on OS X 10.9 with CUDA 7.0
ifeq ($(OSX), 1)CXX : /usr/bin/clangifneq ($(CPU_ONLY), 1)CUDA_VERSION : $(shell $(CUDA_DIR)/bin/nvcc -V | grep -o release \d | grep -o \d)ifeq ($(shell echo | awk {exit $(CUDA_VERSION) 7.0;}), 1)CXXFLAGS -stdliblibstdcLINKFLAGS -stdliblibstdcendif# clang throws this warning for cuda headersWARNINGS -Wno-unneeded-internal-declaration# 10.11 strips DYLD_* env vars so link CUDA (rpath is available on 10.5)OSX_10_OR_LATER : $(shell [ $(OSX_MAJOR_VERSION) -ge 10 ] echo true)OSX_10_5_OR_LATER : $(shell [ $(OSX_MINOR_VERSION) -ge 5 ] echo true)ifeq ($(OSX_10_OR_LATER),true)ifeq ($(OSX_10_5_OR_LATER),true)LDFLAGS -Wl,-rpath,$(CUDA_LIB_DIR)endifendifendif# gtest needs to use its own tuple to not conflict with clangCOMMON_FLAGS -DGTEST_USE_OWN_TR1_TUPLE1# boost::thread is called boost_thread-mt to mark multithreading on OS XLIBRARIES boost_thread-mt# we need to explicitly ask for the rpath to be obeyedORIGIN : loader_pathVERSIONFLAGS -Wl,-install_name,rpath/$(DYNAMIC_VERSIONED_NAME_SHORT) -Wl,-rpath,$(ORIGIN)/../../build/lib
elseORIGIN : \$$ORIGIN
endif# Custom compiler
ifdef CUSTOM_CXXCXX : $(CUSTOM_CXX)
endif# Static linking
ifneq (,$(findstring clang,$(CXX)))STATIC_LINK_COMMAND : -Wl,-force_load $(STATIC_NAME)
else ifneq (,$(findstring g,$(CXX)))STATIC_LINK_COMMAND : -Wl,--whole-archive $(STATIC_NAME) -Wl,--no-whole-archive
else# The following line must not be indented with a tab, since we are not inside a target$(error Cannot static link with the $(CXX) compiler)
endif# Debugging
ifeq ($(DEBUG), 1)COMMON_FLAGS -DDEBUG -g -O0NVCCFLAGS -G
elseCOMMON_FLAGS -DNDEBUG -O2
endif# cuDNN acceleration configuration.
ifeq ($(USE_CUDNN), 1)LIBRARIES cudnnCOMMON_FLAGS -DUSE_CUDNN
endif# configure IO libraries
ifeq ($(USE_OPENCV), 1)COMMON_FLAGS -DUSE_OPENCV
endif
ifeq ($(USE_LEVELDB), 1)COMMON_FLAGS -DUSE_LEVELDB
endif
ifeq ($(USE_LMDB), 1)COMMON_FLAGS -DUSE_LMDB
ifeq ($(ALLOW_LMDB_NOLOCK), 1)COMMON_FLAGS -DALLOW_LMDB_NOLOCK
endif
endif# CPU-only configuration
ifeq ($(CPU_ONLY), 1)OBJS : $(PROTO_OBJS) $(CXX_OBJS)TEST_OBJS : $(TEST_CXX_OBJS)TEST_BINS : $(TEST_CXX_BINS)ALL_WARNS : $(ALL_CXX_WARNS)TEST_FILTER : --gtest_filter-*GPU*COMMON_FLAGS -DCPU_ONLY
endif# Python layer support
ifeq ($(WITH_PYTHON_LAYER), 1)COMMON_FLAGS -DWITH_PYTHON_LAYERLIBRARIES $(PYTHON_LIBRARIES)
endif# BLAS configuration (default ATLAS)
BLAS ? atlas
ifeq ($(BLAS), mkl)# MKLLIBRARIES mkl_rtCOMMON_FLAGS -DUSE_MKLMKL_DIR ? /opt/intel/mklBLAS_INCLUDE ? $(MKL_DIR)/includeBLAS_LIB ? $(MKL_DIR)/lib $(MKL_DIR)/lib/intel64
else ifeq ($(BLAS), open)# OpenBLASLIBRARIES openblas
else# ATLASifeq ($(LINUX), 1)ifeq ($(BLAS), atlas)# Linux simply has cblas and atlasLIBRARIES cblas atlasendifelse ifeq ($(OSX), 1)# OS X packages atlas as the vecLib frameworkLIBRARIES cblas# 10.10 has accelerate while 10.9 has veclibXCODE_CLT_VER : $(shell pkgutil --pkg-infocom.apple.pkg.CLTools_Executables | grep version | sed s/[^0-9]*\([0-9]\).*/\1/)XCODE_CLT_GEQ_6 : $(shell [ $(XCODE_CLT_VER) -gt 5 ] echo 1)ifeq ($(XCODE_CLT_GEQ_6), 1)BLAS_INCLUDE ? /System/Library/Frameworks/Accelerate.framework/Versions/Current/Frameworks/vecLib.framework/Headers/LDFLAGS -framework AccelerateelseBLAS_INCLUDE ? /System/Library/Frameworks/vecLib.framework/Versions/Current/Headers/LDFLAGS -framework vecLibendifendif
endif
INCLUDE_DIRS $(BLAS_INCLUDE)
LIBRARY_DIRS $(BLAS_LIB)LIBRARY_DIRS $(LIB_BUILD_DIR)# Automatic dependency generation (nvcc is handled separately)
CXXFLAGS -MMD -MP# Complete build flags.
COMMON_FLAGS $(foreach includedir,$(INCLUDE_DIRS),-I$(includedir))
CXXFLAGS -pthread -fPIC $(COMMON_FLAGS) $(WARNINGS)
NVCCFLAGS -ccbin$(CXX) -Xcompiler -fPIC $(COMMON_FLAGS)
# mex may invoke an older gcc that is too liberal with -Wuninitalized
MATLAB_CXXFLAGS : $(CXXFLAGS) -Wno-uninitialized
LINKFLAGS -pthread -fPIC $(COMMON_FLAGS) $(WARNINGS)USE_PKG_CONFIG ? 0
ifeq ($(USE_PKG_CONFIG), 1)PKG_CONFIG : $(shell pkg-config opencv --libs)
elsePKG_CONFIG :
endif
LDFLAGS $(foreach librarydir,$(LIBRARY_DIRS),-L$(librarydir)) $(PKG_CONFIG) \$(foreach library,$(LIBRARIES),-l$(library))
PYTHON_LDFLAGS : $(LDFLAGS) $(foreach library,$(PYTHON_LIBRARIES),-l$(library))# superclean target recursively* deletes all files ending with an extension
# in $(SUPERCLEAN_EXTS) below. This may be useful if youve built older
# versions of Caffe that do not place all generated files in a location known
# to the clean target.
#
# supercleanlist will list the files to be deleted by make superclean.
#
# * Recursive with the exception that symbolic links are never followed, per the
# default behavior of find.
SUPERCLEAN_EXTS : .so .a .o .bin .testbin .pb.cc .pb.h _pb2.py .cuo# Set the sub-targets of the everything target.
EVERYTHING_TARGETS : all py$(PROJECT) test warn lint
# Only build matcaffe as part of everything if MATLAB_DIR is specified.
ifneq ($(MATLAB_DIR),)EVERYTHING_TARGETS mat$(PROJECT)
endif##############################
# Define build targets
##############################
.PHONY: all lib test clean docs linecount lint lintclean tools examples $(DIST_ALIASES) \py mat py$(PROJECT) mat$(PROJECT) proto runtest \superclean supercleanlist supercleanfiles warn everythingall: lib tools exampleslib: $(STATIC_NAME) $(DYNAMIC_NAME)everything: $(EVERYTHING_TARGETS)linecount:cloc --read-lang-def$(PROJECT).cloc \src/$(PROJECT) include/$(PROJECT) tools examples \python matlablint: $(EMPTY_LINT_REPORT)lintclean:$(RM) -r $(LINT_OUTPUT_DIR) $(EMPTY_LINT_REPORT) $(NONEMPTY_LINT_REPORT)docs: $(DOXYGEN_OUTPUT_DIR)cd ./docs ; ln -sfn ../$(DOXYGEN_OUTPUT_DIR)/html doxygen$(DOXYGEN_OUTPUT_DIR): $(DOXYGEN_CONFIG_FILE) $(DOXYGEN_SOURCES)$(DOXYGEN_COMMAND) $(DOXYGEN_CONFIG_FILE)$(EMPTY_LINT_REPORT): $(LINT_OUTPUTS) | $(BUILD_DIR)cat $(LINT_OUTPUTS) $if [ -s $ ]; then \cat $; \mv $ $(NONEMPTY_LINT_REPORT); \echo Found one or more lint errors.; \exit 1; \fi; \$(RM) $(NONEMPTY_LINT_REPORT); \echo No lint errors!;$(LINT_OUTPUTS): $(LINT_OUTPUT_DIR)/%.lint.txt : % $(LINT_SCRIPT) | $(LINT_OUTPUT_DIR)mkdir -p $(dir $)python $(LINT_SCRIPT) $ 21 \| grep -v ^Done processing \| grep -v ^Total errors found: 0 \$ \|| truetest: $(TEST_ALL_BIN) $(TEST_ALL_DYNLINK_BIN) $(TEST_BINS)tools: $(TOOL_BINS) $(TOOL_BIN_LINKS)examples: $(EXAMPLE_BINS)py$(PROJECT): pypy: $(PY$(PROJECT)_SO) $(PROTO_GEN_PY)$(PY$(PROJECT)_SO): $(PY$(PROJECT)_SRC) $(PY$(PROJECT)_HXX) | $(DYNAMIC_NAME)echo CXX/LD -o $ $$(Q)$(CXX) -shared -o $ $(PY$(PROJECT)_SRC) \-o $ $(LINKFLAGS) -l$(LIBRARY_NAME) $(PYTHON_LDFLAGS) \-Wl,-rpath,$(ORIGIN)/../../build/libmat$(PROJECT): matmat: $(MAT$(PROJECT)_SO)$(MAT$(PROJECT)_SO): $(MAT$(PROJECT)_SRC) $(STATIC_NAME)if [ -z $(MATLAB_DIR) ]; then \echo MATLAB_DIR must be specified in $(CONFIG_FILE) \to build mat$(PROJECT).; \exit 1; \fiecho MEX $$(Q)$(MATLAB_DIR)/bin/mex $(MAT$(PROJECT)_SRC) \CXX$(CXX) \CXXFLAGS\$$CXXFLAGS $(MATLAB_CXXFLAGS) \CXXLIBS\$$CXXLIBS $(STATIC_LINK_COMMAND) $(LDFLAGS) -output $if [ -f $(PROJECT)_.d ]; then \mv -f $(PROJECT)_.d $(BUILD_DIR)/${MAT$(PROJECT)_SO:.$(MAT_SO_EXT).d}; \firuntest: $(TEST_ALL_BIN)$(TOOL_BUILD_DIR)/caffe$(TEST_ALL_BIN) $(TEST_GPUID) --gtest_shuffle $(TEST_FILTER)pytest: pycd python; python -m unittest discover -s caffe/testmattest: matcd matlab; $(MATLAB_DIR)/bin/matlab -nodisplay -r caffe.run_tests(), exit()warn: $(EMPTY_WARN_REPORT)$(EMPTY_WARN_REPORT): $(ALL_WARNS) | $(BUILD_DIR)cat $(ALL_WARNS) $if [ -s $ ]; then \cat $; \mv $ $(NONEMPTY_WARN_REPORT); \echo Compiler produced one or more warnings.; \exit 1; \fi; \$(RM) $(NONEMPTY_WARN_REPORT); \echo No compiler warnings!;$(ALL_WARNS): %.o.$(WARNS_EXT) : %.o$(BUILD_DIR_LINK): $(BUILD_DIR)/.linked# Create a target .linked in this BUILD_DIR to tell Make that the build link
# is currently correct, then delete the one in the OTHER_BUILD_DIR in case it
# exists and $(DEBUG) is toggled later.
$(BUILD_DIR)/.linked:mkdir -p $(BUILD_DIR)$(RM) $(OTHER_BUILD_DIR)/.linked$(RM) -r $(BUILD_DIR_LINK)ln -s $(BUILD_DIR) $(BUILD_DIR_LINK)touch $$(ALL_BUILD_DIRS): | $(BUILD_DIR_LINK)mkdir -p $$(DYNAMIC_NAME): $(OBJS) | $(LIB_BUILD_DIR)echo LD -o $$(Q)$(CXX) -shared -o $ $(OBJS) $(VERSIONFLAGS) $(LINKFLAGS) $(LDFLAGS)cd $(BUILD_DIR)/lib; rm -f $(DYNAMIC_NAME_SHORT); ln -s $(DYNAMIC_VERSIONED_NAME_SHORT) $(DYNAMIC_NAME_SHORT)$(STATIC_NAME): $(OBJS) | $(LIB_BUILD_DIR)echo AR -o $$(Q)ar rcs $ $(OBJS)$(BUILD_DIR)/%.o: %.cpp | $(ALL_BUILD_DIRS)echo CXX $$(Q)$(CXX) $ $(CXXFLAGS) -c -o $ 2 $.$(WARNS_EXT) \|| (cat $.$(WARNS_EXT); exit 1)cat $.$(WARNS_EXT)$(PROTO_BUILD_DIR)/%.pb.o: $(PROTO_BUILD_DIR)/%.pb.cc $(PROTO_GEN_HEADER) \| $(PROTO_BUILD_DIR)echo CXX $$(Q)$(CXX) $ $(CXXFLAGS) -c -o $ 2 $.$(WARNS_EXT) \|| (cat $.$(WARNS_EXT); exit 1)cat $.$(WARNS_EXT)$(BUILD_DIR)/cuda/%.o: %.cu | $(ALL_BUILD_DIRS)echo NVCC $$(Q)$(CUDA_DIR)/bin/nvcc $(NVCCFLAGS) $(CUDA_ARCH) -M $ -o ${:.o.d} \-odir $(D)$(Q)$(CUDA_DIR)/bin/nvcc $(NVCCFLAGS) $(CUDA_ARCH) -c $ -o $ 2 $.$(WARNS_EXT) \|| (cat $.$(WARNS_EXT); exit 1)cat $.$(WARNS_EXT)$(TEST_ALL_BIN): $(TEST_MAIN_SRC) $(TEST_OBJS) $(GTEST_OBJ) \| $(DYNAMIC_NAME) $(TEST_BIN_DIR)echo CXX/LD -o $ $$(Q)$(CXX) $(TEST_MAIN_SRC) $(TEST_OBJS) $(GTEST_OBJ) \-o $ $(LINKFLAGS) $(LDFLAGS) -l$(LIBRARY_NAME) -Wl,-rpath,$(ORIGIN)/../lib$(TEST_CU_BINS): $(TEST_BIN_DIR)/%.testbin: $(TEST_CU_BUILD_DIR)/%.o \$(GTEST_OBJ) | $(DYNAMIC_NAME) $(TEST_BIN_DIR)echo LD $$(Q)$(CXX) $(TEST_MAIN_SRC) $ $(GTEST_OBJ) \-o $ $(LINKFLAGS) $(LDFLAGS) -l$(LIBRARY_NAME) -Wl,-rpath,$(ORIGIN)/../lib$(TEST_CXX_BINS): $(TEST_BIN_DIR)/%.testbin: $(TEST_CXX_BUILD_DIR)/%.o \$(GTEST_OBJ) | $(DYNAMIC_NAME) $(TEST_BIN_DIR)echo LD $$(Q)$(CXX) $(TEST_MAIN_SRC) $ $(GTEST_OBJ) \-o $ $(LINKFLAGS) $(LDFLAGS) -l$(LIBRARY_NAME) -Wl,-rpath,$(ORIGIN)/../lib# Target for extension-less symlinks to tool binaries with extension *.bin.
$(TOOL_BUILD_DIR)/%: $(TOOL_BUILD_DIR)/%.bin | $(TOOL_BUILD_DIR)$(RM) $ln -s $(notdir $) $$(TOOL_BINS): %.bin : %.o | $(DYNAMIC_NAME)echo CXX/LD -o $$(Q)$(CXX) $ -o $ $(LINKFLAGS) -l$(LIBRARY_NAME) $(LDFLAGS) \-Wl,-rpath,$(ORIGIN)/../lib$(EXAMPLE_BINS): %.bin : %.o | $(DYNAMIC_NAME)echo CXX/LD -o $$(Q)$(CXX) $ -o $ $(LINKFLAGS) -l$(LIBRARY_NAME) $(LDFLAGS) \-Wl,-rpath,$(ORIGIN)/../../libproto: $(PROTO_GEN_CC) $(PROTO_GEN_HEADER)$(PROTO_BUILD_DIR)/%.pb.cc $(PROTO_BUILD_DIR)/%.pb.h : \$(PROTO_SRC_DIR)/%.proto | $(PROTO_BUILD_DIR)echo PROTOC $$(Q)protoc --proto_path$(PROTO_SRC_DIR) --cpp_out$(PROTO_BUILD_DIR) $$(PY_PROTO_BUILD_DIR)/%_pb2.py : $(PROTO_SRC_DIR)/%.proto \$(PY_PROTO_INIT) | $(PY_PROTO_BUILD_DIR)echo PROTOC \(python\) $$(Q)protoc --proto_path$(PROTO_SRC_DIR) --python_out$(PY_PROTO_BUILD_DIR) $$(PY_PROTO_INIT): | $(PY_PROTO_BUILD_DIR)touch $(PY_PROTO_INIT)clean:- $(RM) -rf $(ALL_BUILD_DIRS)- $(RM) -rf $(OTHER_BUILD_DIR)- $(RM) -rf $(BUILD_DIR_LINK)- $(RM) -rf $(DISTRIBUTE_DIR)- $(RM) $(PY$(PROJECT)_SO)- $(RM) $(MAT$(PROJECT)_SO)supercleanfiles:$(eval SUPERCLEAN_FILES : $(strip \$(foreach ext,$(SUPERCLEAN_EXTS), $(shell find . -name *$(ext) \-not -path ./data/*))))supercleanlist: supercleanfiles\if [ -z $(SUPERCLEAN_FILES) ]; then \echo No generated files found.; \else \echo $(SUPERCLEAN_FILES) | tr \n; \fisuperclean: clean supercleanfiles\if [ -z $(SUPERCLEAN_FILES) ]; then \echo No generated files found.; \else \echo Deleting the following generated files:; \echo $(SUPERCLEAN_FILES) | tr \n; \$(RM) $(SUPERCLEAN_FILES); \fi$(DIST_ALIASES): $(DISTRIBUTE_DIR)$(DISTRIBUTE_DIR): all py | $(DISTRIBUTE_SUBDIRS)# add protocp -r src/caffe/proto $(DISTRIBUTE_DIR)/# add includecp -r include $(DISTRIBUTE_DIR)/mkdir -p $(DISTRIBUTE_DIR)/include/caffe/protocp $(PROTO_GEN_HEADER_SRCS) $(DISTRIBUTE_DIR)/include/caffe/proto# add tool and example binariescp $(TOOL_BINS) $(DISTRIBUTE_DIR)/bincp $(EXAMPLE_BINS) $(DISTRIBUTE_DIR)/bin# add librariescp $(STATIC_NAME) $(DISTRIBUTE_DIR)/libinstall -m 644 $(DYNAMIC_NAME) $(DISTRIBUTE_DIR)/libcd $(DISTRIBUTE_DIR)/lib; rm -f $(DYNAMIC_NAME_SHORT); ln -s $(DYNAMIC_VERSIONED_NAME_SHORT) $(DYNAMIC_NAME_SHORT)# add python - its not the standard way, indeed...cp -r python $(DISTRIBUTE_DIR)/python-include $(DEPS)
