什么是域名备案,郑州优化网站推广,手机网络不好怎么办,公司网页制作教程实验目的#xff1a;
1、R6为ISP#xff0c;接口IP地址均为公有地址#xff0c;该设备只能配置IP地址#xff0c;之后不能再对其进行任何配置#xff1b; 2、R1-R5为局域网#xff0c;私有IP地址192.168.1.0/24#xff0c;请合理分配#xff1b; 3、R1、R2、R4#x…实验目的
1、R6为ISP接口IP地址均为公有地址该设备只能配置IP地址之后不能再对其进行任何配置 2、R1-R5为局域网私有IP地址192.168.1.0/24请合理分配 3、R1、R2、R4各有两个环回IP地址R5,R6各有一个环回地址所有路由器上环回均代表连接用户的接口 4、R3下面的两台PC通过DHCP自动获取IP地址 5、选路最佳路由表尽量小避免环路 6、R1-R5均可以访问R6的环回 7、R6 telnet R5的公有地址时实际登录到R1上 8、R4与R5正常通过1000M链路故障时通过100m链路
实验步骤
1.子网划分
192.168.1.0 30
192.168.1.4 30
192.168.1.8 30
192.168.1.12 30
192.168.1.16 30
192.168.1.20 30
2.R1配置:
Huaweisystem-view
[Huawei]sysname R1
[R1]
#配置环回接口
[R1]int loopback 0
[R1-LoopBack0]ip add 192.168.1.33 28
[R1-LoopBack0]int loopback 1
[R1-LoopBack1]ip add 192.168.1.49 28
[R1-LoopBack1]q
[R1]int g 0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 30
[R1-GigabitEthernet0/0/0]quit
[R1]int g 0/0/1
[R1-GigabitEthernet0/0/1]ip add 192.168.1.9 30
[R1-GigabitEthernet0/0/1]quit#配置静态路由
[R1]ip route-static 192.168.1.65 28 192.168.1.2
[R1]ip route-static 192.168.1.81 28 192.168.1.2
[R1]ip route-static 192.168.1.5 28 192.168.1.2
[R1]ip route-static 192.168.1.97 27 192.168.1.10
[R1]ip route-static 192.168.1.13 30 192.168.1.10
[R1]ip route-static 192.168.1.14 30 192.168.1.10
[R1]ip route-static 192.168.1.129 28 192.168.1.2
[R1]ip route-static 192.168.1.145 28 192.168.1.2
[R1]ip route-static 192.168.1.17 30 192.168.1.2
[R1]ip route-static 192.168.1.21 30 192.168.1.2
[R1]ip route-static 192.168.1.161 27 192.168.1.2
[R1]ip route-static 192.168.1.161 27 192.168.1.10
[R1]ip route-static 192.168.1.129 28 192.168.1.10
[R1]ip route-static 192.168.1.145 28 192.168.1.10[R1]ip route-static 192.168.1.32 27 NULL 0#缺省路由
[R1]ip route-static 0.0.0.0 0 192.168.1.2
[R1]ip route-static 0.0.0.0 0 192.168.1.10#配置telent服务
[R1]aaa
[R1-aaa]local-user rrl password cipher rrl12345 privilege level 15
Info: Add a new user.
[R1-aaa]local-user rrl service-type telnet
[R1-aaa]q
[R1]user-in
[R1]user-interface v
[R1]user-interface vty 0 4
[R1-ui-vty0-4]au
[R1-ui-vty0-4]authentication-mode aaa
3.R3配置:
[R3]int g 0/0/0
[R3-GigabitEthernet0/0/0]ip add
[R3-GigabitEthernet0/0/0]ip address 192.168.1.10 30
Mar 19 2024 16:02:10-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]q
[R3]
[R3]int g0/0/2
[R3-GigabitEthernet0/0/2]ip add 192.168.1.97 27
[R3-GigabitEthernet0/0/2]q
[R3]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 192.168.1.13 30
[R3-GigabitEthernet0/0/1]q#dhcp配置
[R3]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[R3]int g0/0/2
[R3-GigabitEthernet0/0/2]dhcp select global
[R3-GigabitEthernet0/0/2]q
[R3]ip pool 1
Info: Its successful to create an IP address pool.
[R3-ip-pool-1]network 192.168.1.96 mask 27
[R3-ip-pool-1]gateway-list 192.168.1.97
[R3-ip-pool-1]dns
[R3-ip-pool-1]dns-list 114.114.114.114
[R3-ip-pool-1]q
#静态路由配置
[R3]ip route-static 192.168.1.33 28 192.168.1.9
[R3]ip route-static 192.168.1.49 28 192.168.1.9
[R3]ip route-static 192.168.1.1 30 192.168.1.9
[R3]ip route-static 192.168.1.6 30 192.168.1.14
[R3]ip route-static 192.168.1.129 28 192.168.1.14
[R3]ip route-static 192.168.1.145 28 192.168.1.14
[R3]ip route-static 192.168.1.17 30 192.168.1.14
[R3]ip route-static 192.168.1.21 30 192.168.1.14
[R3]ip route-static 192.168.1.65 28 192.168.1.9
[R3]ip route-static 192.168.1.65 28 192.168.1.14
[R3]ip route-static 192.168.1.81 28 192.168.1.14
[R3]ip route-static 192.168.1.81 28 192.168.1.9
[R3]ip route-static 192.168.1.161 27 192.168.1.14
#缺省路由
[R3]ip route-static 0.0.0.0 0 192.168.1.14
4.R4配置
Huaweisys
Enter system view, return user view with CtrlZ.
[Huawei]sys
[Huawei]sysname R4
[R4]int loo
[R4]int LoopBack 0
[R4-LoopBack0]ip add 192.168.1.129 28
[R4-LoopBack0]q
[R4]int loo
[R4]int LoopBack 1
[R4-LoopBack1]ip add 192.168.1.145 28
[R4-LoopBack1]q
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 192.168.1.6 30
[R4-GigabitEthernet0/0/0]q
[R4]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.1.14 30
[R4-GigabitEthernet0/0/1]q
[R4]int g0/0/2
[R4-GigabitEthernet0/0/2]ip add 192.168.1.17 30
[R4-GigabitEthernet0/0/2]q
[R4]int g4/0/0
[R4-GigabitEthernet4/0/0]ip add 192.168.1.21 30
[R4-GigabitEthernet4/0/0]q#静态路由配置
[R4]ip route-static 192.168.1.2 30 192.168.1.5
[R4]ip route-static 192.168.1.97 27 192.168.1.13
[R4]ip route-static 192.168.1.10 30 192.168.1.13
[R4]ip route-static 192.168.1.33 30 192.168.1.13
[R4]ip route-static 192.168.1.49 30 192.168.1.13
[R4]ip route-static 192.168.1.65 28 192.168.1.5
[R4]ip route-static 192.168.1.81 28 192.168.1.5
[R4]ip route-static 192.168.1.161 27 192.168.1.18
[R4]ip route-static 192.168.1.161 27 192.168.1.22
[R4]ip route-static 192.168.1.33 30 192.168.1.5
[R4]ip route-static 192.168.1.49 30 192.168.1.5[R4]ip route-static 192.168.1.128 27 NULL 0#缺省路由
[R4]ip route-static 0.0.0.0 0 192.168.1.18
[R4]ip route-static 0.0.0.0 0 192.168.1.22#更改优先级
[R4]ip route-static 0.0.0.0 0 192.168.1.22 preference 61
5.R5配置
Huaweisys
Enter system view, return user view with CtrlZ.
[Huawei]sys
[Huawei]sysname R5
#环回接口
[R5]int LoopBack 0
[R5-LoopBack0]ip add 192.168.1.161 27
[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 192.168.1.18 30
[R5-GigabitEthernet0/0/0]q
[R5]int g0/0/2
[R5-GigabitEthernet0/0/2]ip add 192.168.1.22 30
[R5-GigabitEthernet0/0/2]q
[R5]int g0/0/1
[R5-GigabitEthernet0/0/1]ip add 12.0.0.1 24
[R5-GigabitEthernet0/0/1]q
[R5]q
R5save#静态路由配置
[R5]ip route-static 192.168.1.6 30 192.168.1.17
[R5]ip route-static 192.168.1.65 28 192.168.1.17
[R5]ip route-static 192.168.1.81 28 192.168.1.17
[R5]ip route-static 192.168.1.14 30 192.168.1.17
[R5]ip route-static 192.168.1.97 27 192.168.1.17
[R5]ip route-static 192.168.1.2 30 192.168.1.17
[R5]ip route-static 192.168.1.10 30 192.168.1.17
[R5]ip route-static 192.168.1.33 28 192.168.1.17
[R5]ip route-static 192.168.1.49 28 192.168.1.17
[R5]ip route-static 192.168.1.129 28 192.168.1.21
[R5]ip route-static 192.168.1.145 28 192.168.1.21
[R5]ip route-static 192.168.1.6 30 192.168.1.21
[R5]ip route-static 192.168.1.65 28 192.168.1.21
[R5]ip route-static 192.168.1.81 28 192.168.1.21
[R5]ip route-static 192.168.1.2 30 192.168.1.21
[R5]ip route-static 192.168.1.33 28 192.168.1.21
[R5]ip route-static 192.168.1.49 28 192.168.1.21
[R5]ip route-static 192.168.1.10 30 192.168.1.21
[R5]ip route-static 192.168.1.97 27 192.168.1.21#公网配置
[R5]ip route-static 0.0.0.0 0 12.0.0.6
[R5]acl 2000
[R5-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R5-acl-basic-2000]q
[R5] int 0/0/1
[R5]int g0/0/1
[R5-GigabitEthernet0/0/1]nat o
[R5-GigabitEthernet0/0/1]nat outbound 2000
[R5-GigabitEthernet0/0/1]q#telent地址1映射
[R5]int g0/0/1
[R5-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 23 in [R5-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 23 ins
ide 192.168.1.1 23
Warning:The port 23 is well-known port. If you continue it may cause function fa
ilure.
Are you sure to continue?[Y/N]:y#更改优先级将192.168.1.20网段优先级改为61
[R5]ip route-static 192.168.1.0 30 192.168.1.21 pre 61
Info: Succeeded in modifying route.
[R5]ip route-static 192.168.1.4 30 192.168.1.21 pre 61
Info: Succeeded in modifying route.
[R5]ip route-static 192.168.1.8 30 192.168.1.21 pre 61
Info: Succeeded in modifying route.
[R5]ip route-static 192.168.1.12 30 192.168.1.21 pre 61
[R5]ip route-static 192.168.1.64 27 192.168.1.21 pre 61
[R5]ip route-static 192.168.1.32 27 192.168.1.21 pre 61
[R5]ip route-static 192.168.1.128 27 192.168.1.21 pre 61
[R5]ip route-static 192.168.1.96 27 192.168.1.21 pre 61
6.R6配置
Huaweisys
Enter system view, return user view with CtrlZ.
[Huawei]sys
[Huawei]sysname R6
[R6]int g0/0/0
[R6-GigabitEthernet0/0/0]ip add 12.0.0.6 24
[R6-GigabitEthernet0/0/0]q
[R6]int LoopBack 0
[R6-LoopBack0]ip add 1.1.1.6 24
